Macros
#define	PCI_EXPRESS_LIB_ADDRESS(Bus, Device, Function, Offset) PCI_ECAM_ADDRESS ((Bus), (Device), (Function), (Offset))

Functions
RETURN_STATUS EFIAPI	PciExpressRegisterForRuntimeAccess (IN UINTN Address)

UINT8 EFIAPI	PciExpressRead8 (IN UINTN Address)

UINT8 EFIAPI	PciExpressWrite8 (IN UINTN Address, IN UINT8 Value)

UINT8 EFIAPI	PciExpressOr8 (IN UINTN Address, IN UINT8 OrData)

UINT8 EFIAPI	PciExpressAnd8 (IN UINTN Address, IN UINT8 AndData)

UINT8 EFIAPI	PciExpressAndThenOr8 (IN UINTN Address, IN UINT8 AndData, IN UINT8 OrData)

UINT8 EFIAPI	PciExpressBitFieldRead8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)

UINT8 EFIAPI	PciExpressBitFieldWrite8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value)

UINT8 EFIAPI	PciExpressBitFieldOr8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData)

UINT8 EFIAPI	PciExpressBitFieldAnd8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData)

UINT8 EFIAPI	PciExpressBitFieldAndThenOr8 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData)

UINT16 EFIAPI	PciExpressRead16 (IN UINTN Address)

UINT16 EFIAPI	PciExpressWrite16 (IN UINTN Address, IN UINT16 Value)

UINT16 EFIAPI	PciExpressOr16 (IN UINTN Address, IN UINT16 OrData)

UINT16 EFIAPI	PciExpressAnd16 (IN UINTN Address, IN UINT16 AndData)

UINT16 EFIAPI	PciExpressAndThenOr16 (IN UINTN Address, IN UINT16 AndData, IN UINT16 OrData)

UINT16 EFIAPI	PciExpressBitFieldRead16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)

UINT16 EFIAPI	PciExpressBitFieldWrite16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value)

UINT16 EFIAPI	PciExpressBitFieldOr16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData)

UINT16 EFIAPI	PciExpressBitFieldAnd16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData)

UINT16 EFIAPI	PciExpressBitFieldAndThenOr16 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData)

UINT32 EFIAPI	PciExpressRead32 (IN UINTN Address)

UINT32 EFIAPI	PciExpressWrite32 (IN UINTN Address, IN UINT32 Value)

UINT32 EFIAPI	PciExpressOr32 (IN UINTN Address, IN UINT32 OrData)

UINT32 EFIAPI	PciExpressAnd32 (IN UINTN Address, IN UINT32 AndData)

UINT32 EFIAPI	PciExpressAndThenOr32 (IN UINTN Address, IN UINT32 AndData, IN UINT32 OrData)

UINT32 EFIAPI	PciExpressBitFieldRead32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit)

UINT32 EFIAPI	PciExpressBitFieldWrite32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value)

UINT32 EFIAPI	PciExpressBitFieldOr32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData)

UINT32 EFIAPI	PciExpressBitFieldAnd32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData)

UINT32 EFIAPI	PciExpressBitFieldAndThenOr32 (IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData)

UINTN EFIAPI	PciExpressReadBuffer (IN UINTN StartAddress, IN UINTN Size, OUT VOID *Buffer)

UINTN EFIAPI	PciExpressWriteBuffer (IN UINTN StartAddress, IN UINTN Size, IN VOID *Buffer)

Detailed Description

Provides services to access PCI Configuration Space using the MMIO PCI Express window.

This library is identical to the PCI Library, except the access method for performing PCI configuration cycles must be through the PCI Express MMIO window whose base address is defined by PcdPciExpressBaseAddress and size defined by PcdPciExpressBaseSize.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent

Macro Definition Documentation

#define PCI_EXPRESS_LIB_ADDRESS	(	Bus,
		Device,
		Function,
		Offset
	)	PCI_ECAM_ADDRESS ((Bus), (Device), (Function), (Offset))

Macro that converts PCI Bus, PCI Device, PCI Function and PCI Register to an address that can be passed to the PCI Library functions.

Computes an address that is compatible with the PCI Library functions. The unused upper bits of Bus, Device, Function and Register are stripped prior to the generation of the address.

Parameters

Bus	PCI Bus number. Range 0..255.
Device	PCI Device number. Range 0..31.
Function	PCI Function number. Range 0..7.
Register	PCI Register number. Range 0..4095.

Returns: The encode PCI address.

Function Documentation

UINT16 EFIAPI PciExpressAnd16	(	IN UINTN	Address,
		IN UINT16	AndData
	)

Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressAnd32	(	IN UINTN	Address,
		IN UINT32	AndData
	)

Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressAnd8	(	IN UINTN	Address,
		IN UINT8	AndData
	)

Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressAndThenOr16	(	IN UINTN	Address,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, followed a bitwise OR with another 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressAndThenOr32	(	IN UINTN	Address,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, followed a bitwise OR with another 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressAndThenOr8	(	IN UINTN	Address,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, followed a bitwise OR with another 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise OR between the result of the AND operation and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressBitFieldAnd16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData
	)

Reads a bit field in a 16-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 16-bit register.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressBitFieldAnd32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData
	)

Reads a bit field in a 32-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 32-bit register.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressBitFieldAnd8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData
	)

Reads a bit field in an 8-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 8-bit register.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressBitFieldAndThenOr16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	AndData,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressBitFieldAndThenOr32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	AndData,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressBitFieldAndThenOr8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	AndData,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit port, performs a bitwise AND followed by a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise OR between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
AndData	The value to AND with the PCI configuration register.
OrData	The value to OR with the result of the AND operation.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressBitFieldOr16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	OrData
	)

Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 16-bit port.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressBitFieldOr32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	OrData
	)

Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 32-bit port.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressBitFieldOr8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	OrData
	)

Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 8-bit port.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped.

If Address > 0x0FFFFFFF, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressBitFieldRead16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in a 16-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.

Returns: The value of the bit field read from the PCI configuration register.

UINT32 EFIAPI PciExpressBitFieldRead32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in a 32-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.

Returns: The value of the bit field read from the PCI configuration register.

UINT8 EFIAPI PciExpressBitFieldRead8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit
	)

Reads a bit field of a PCI configuration register.

Reads the bit field in an 8-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT().

Parameters

Address	PCI configuration register to read.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.

Returns: The value of the bit field read from the PCI configuration register.

UINT16 EFIAPI PciExpressBitFieldWrite16	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT16	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 16-bit register is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..15.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..15.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressBitFieldWrite32	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT32	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 32-bit register is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..31.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..31.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressBitFieldWrite8	(	IN UINTN	Address,
		IN UINTN	StartBit,
		IN UINTN	EndBit,
		IN UINT8	Value
	)

Writes a bit field to a PCI configuration register.

Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 8-bit register is returned.

If Address > 0x0FFFFFFF, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

Parameters

Address	PCI configuration register to write.
StartBit	The ordinal of the least significant bit in the bit field. Range 0..7.
EndBit	The ordinal of the most significant bit in the bit field. Range 0..7.
Value	New value of the bit field.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressOr16	(	IN UINTN	Address,
		IN UINT16	OrData
	)

Performs a bitwise OR of a 16-bit PCI configuration register with a 16-bit value.

Reads the 16-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT32 EFIAPI PciExpressOr32	(	IN UINTN	Address,
		IN UINT32	OrData
	)

Performs a bitwise OR of a 32-bit PCI configuration register with a 32-bit value.

Reads the 32-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT8 EFIAPI PciExpressOr8	(	IN UINTN	Address,
		IN UINT8	OrData
	)

Performs a bitwise OR of an 8-bit PCI configuration register with an 8-bit value.

Reads the 8-bit PCI configuration register specified by Address, performs a bitwise OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
OrData	The value to OR with the PCI configuration register.

Returns: The value written back to the PCI configuration register.

UINT16 EFIAPI PciExpressRead16 ( IN UINTN Address )

Reads a 16-bit PCI configuration register.

Reads and returns the 16-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address Address that encodes the PCI Bus, Device, Function and Register.

Returns: The read value from the PCI configuration register.

UINT32 EFIAPI PciExpressRead32 ( IN UINTN Address )

Reads a 32-bit PCI configuration register.

Reads and returns the 32-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address Address that encodes the PCI Bus, Device, Function and Register.

Returns: The read value from the PCI configuration register.

UINT8 EFIAPI PciExpressRead8 ( IN UINTN Address )

Reads an 8-bit PCI configuration register.

Reads and returns the 8-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address Address that encodes the PCI Bus, Device, Function and Register.

Returns: The read value from the PCI configuration register.

UINTN EFIAPI PciExpressReadBuffer	(	IN UINTN	StartAddress,
		IN UINTN	Size,
		OUT VOID *	Buffer
	)

Reads a range of PCI configuration registers into a caller supplied buffer.

Reads the range of PCI configuration registers specified by StartAddress and Size into the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be read. Size is returned. When possible 32-bit PCI configuration read cycles are used to read from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration read cycles may be used at the beginning and the end of the range.

If StartAddress > 0x0FFFFFFF, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT().

Parameters

StartAddress	Starting address that encodes the PCI Bus, Device, Function and Register.
Size	Size in bytes of the transfer.
Buffer	Pointer to a buffer receiving the data read.

Returns: Size read data from StartAddress.

RETURN_STATUS EFIAPI PciExpressRegisterForRuntimeAccess ( IN UINTN Address )

Registers a PCI device so PCI configuration registers may be accessed after SetVirtualAddressMap().

Registers the PCI device specified by Address so all the PCI configuration registers associated with that PCI device may be accessed after SetVirtualAddressMap() is called.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address Address that encodes the PCI Bus, Device, Function and Register.

Return values

RETURN_SUCCESS	The PCI device was registered for runtime access.
RETURN_UNSUPPORTED	An attempt was made to call this function after ExitBootServices().
RETURN_UNSUPPORTED	The resources required to access the PCI device at runtime could not be mapped.
RETURN_OUT_OF_RESOURCES	There are not enough resources available to complete the registration.

UINT16 EFIAPI PciExpressWrite16	(	IN UINTN	Address,
		IN UINT16	Value
	)

Writes a 16-bit PCI configuration register.

Writes the 16-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
Value	The value to write.

Returns: The value written to the PCI configuration register.

UINT32 EFIAPI PciExpressWrite32	(	IN UINTN	Address,
		IN UINT32	Value
	)

Writes a 32-bit PCI configuration register.

Writes the 32-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
Value	The value to write.

Returns: The value written to the PCI configuration register.

UINT8 EFIAPI PciExpressWrite8	(	IN UINTN	Address,
		IN UINT8	Value
	)

Writes an 8-bit PCI configuration register.

Writes the 8-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized.

If Address > 0x0FFFFFFF, then ASSERT().

Parameters

Address	Address that encodes the PCI Bus, Device, Function and Register.
Value	The value to write.

Returns: The value written to the PCI configuration register.

UINTN EFIAPI PciExpressWriteBuffer	(	IN UINTN	StartAddress,
		IN UINTN	Size,
		IN VOID *	Buffer
	)

Copies the data in a caller supplied buffer to a specified range of PCI configuration space.

Writes the range of PCI configuration registers specified by StartAddress and Size from the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be written. Size is returned. When possible 32-bit PCI configuration write cycles are used to write from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration write cycles may be used at the beginning and the end of the range.

If StartAddress > 0x0FFFFFFF, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT().

Parameters

StartAddress	Starting address that encodes the PCI Bus, Device, Function and Register.
Size	Size in bytes of the transfer.
Buffer	Pointer to a buffer containing the data to write.

Returns: Size written to StartAddress.

Macros

Functions

Detailed Description

Macro Definition Documentation

Function Documentation