MdePkg[all]
1.08
|
EFI_IPv4_ADDRESS* EFI_DNS4_CONFIG_DATA::DnsServerList |
Pointer to DNS server list containing DnsServerListCount entries or NULL if DnsServerListCountis 0. For Configure(), this will be NULL when there are no caller supplied server addresses, and, the DNS instance will retrieve DNS server from DHCP Server. The provided DNS server list is recommended to be filled up in the sequence of preference. When used with GetModeData(), the buffer containing the list will be allocated by the driver implementing this protocol and must be freed by the caller. When used with Configure(), the buffer containing the list will be allocated and released by the caller.
UINTN EFI_DNS4_CONFIG_DATA::DnsServerListCount |
Count of the DNS servers. When used with GetModeData(), this field is the count of originally configured servers when Configure() was called for this instance. When used with Configure() this is the count of caller-supplied servers. If the DnsServerListCount is zero, the DNS server configuration will be retrieved from DHCP server automatically.
BOOLEAN EFI_DNS4_CONFIG_DATA::EnableDnsCache |
If TRUE, enable DNS cache function for this DNS instance. If FALSE, all DNS query will not lookup local DNS cache.
UINT16 EFI_DNS4_CONFIG_DATA::LocalPort |
Local port number. Set to zero to use the automatically assigned port number.
UINT8 EFI_DNS4_CONFIG_DATA::Protocol |
Use the protocol number defined in "Links to UEFI-Related Documents"(http://uefi.org/uefi) under the heading "IANA Protocol Numbers". Only TCP or UDP are supported, and other protocol values are invalid. An implementation can choose to support only UDP, or both TCP and UDP.
UINT32 EFI_DNS4_CONFIG_DATA::RetryCount |
Retry number if no response received after RetryInterval.
UINT32 EFI_DNS4_CONFIG_DATA::RetryInterval |
Minimum interval of retry is 2 second. If the retry interval is less than 2 seconds, then use the 2 seconds.
EFI_IPv4_ADDRESS EFI_DNS4_CONFIG_DATA::StationIp |
If UseDefaultSetting is FALSE indicates the station address to use.
EFI_IPv4_ADDRESS EFI_DNS4_CONFIG_DATA::SubnetMask |
If UseDefaultSetting is FALSE indicates the subnet mask to use.
BOOLEAN EFI_DNS4_CONFIG_DATA::UseDefaultSetting |
Set to TRUE to use the default IP address/subnet mask and default routing table.