|
MdePkg[all]
1.08
|
|
MdePkg[all]
1.08
|
Data Structures | |
| struct | _EFI_USB_IO_PROTOCOL |
Macros | |
| #define | EFI_USB_IO_PROTOCOL_GUID |
| #define | EFI_USB_NOERROR 0x00 |
| #define | EFI_USB_ERR_NOTEXECUTE 0x01 |
| #define | EFI_USB_ERR_STALL 0x02 |
| #define | EFI_USB_ERR_BUFFER 0x04 |
| #define | EFI_USB_ERR_BABBLE 0x08 |
| #define | EFI_USB_ERR_NAK 0x10 |
| #define | EFI_USB_ERR_CRC 0x20 |
| #define | EFI_USB_ERR_TIMEOUT 0x40 |
| #define | EFI_USB_ERR_BITSTUFF 0x80 |
| #define | EFI_USB_ERR_SYSTEM 0x100 |
Enumerations | |
| enum | EFI_USB_DATA_DIRECTION { EfiUsbDataIn, EfiUsbDataOut, EfiUsbNoData } |
Variables | |
| EFI_GUID | gEfiUsbIoProtocolGuid |
EFI Usb I/O Protocol as defined in UEFI specification. This protocol is used by code, typically drivers, running in the EFI boot services environment to access USB devices like USB keyboards, mice and mass storage devices. In particular, functions for managing devices on USB buses are defined here.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
| #define EFI_USB_ERR_BABBLE 0x08 |
| #define EFI_USB_ERR_BITSTUFF 0x80 |
| #define EFI_USB_ERR_BUFFER 0x04 |
| #define EFI_USB_ERR_CRC 0x20 |
| #define EFI_USB_ERR_NAK 0x10 |
| #define EFI_USB_ERR_NOTEXECUTE 0x01 |
| #define EFI_USB_ERR_STALL 0x02 |
| #define EFI_USB_ERR_SYSTEM 0x100 |
| #define EFI_USB_ERR_TIMEOUT 0x40 |
| #define EFI_USB_IO_PROTOCOL_GUID |
| #define EFI_USB_NOERROR 0x00 |
| typedef EFI_STATUS(EFIAPI * EFI_ASYNC_USB_TRANSFER_CALLBACK)(IN VOID *Data, IN UINTN DataLength, IN VOID *Context, IN UINT32 Status) |
Async USB transfer callback routine.
| Data | Data received or sent via the USB Asynchronous Transfer, if the transfer completed successfully. |
| DataLength | The length of Data received or sent via the Asynchronous Transfer, if transfer successfully completes. |
| Context | Data passed from UsbAsyncInterruptTransfer() request. |
| Status | Indicates the result of the asynchronous transfer. |
| EFI_SUCCESS | The asynchronous USB transfer request has been successfully executed. |
| EFI_DEVICE_ERROR | The asynchronous USB transfer request failed. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_ASYNC_INTERRUPT_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 DeviceEndpoint, IN BOOLEAN IsNewTransfer, IN UINTN PollingInterval, IN UINTN DataLength, IN EFI_ASYNC_USB_TRANSFER_CALLBACK InterruptCallBack, IN VOID *Context) |
This function is used to manage a USB device with an interrupt transfer pipe. An Asynchronous Interrupt Transfer is typically used to query a device's status at a fixed rate. For example, keyboard, mouse, and hub devices use this type of transfer to query their interrupt endpoints at a fixed rate.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceEndpoint | The destination USB device endpoint to which the device request is being sent. DeviceEndpoint must be between 0x01 and 0x0F or between 0x81 and 0x8F, otherwise EFI_INVALID_PARAMETER is returned. If the endpoint is not a BULK endpoint, EFI_INVALID_PARAMETER is returned. The MSB of this parameter indicates the endpoint direction. The number "1" stands for an IN endpoint, and "0" stands for an OUT endpoint. |
| IsNewTransfer | If TRUE, a new transfer will be submitted to USB controller. If FALSE, the interrupt transfer is deleted from the device's interrupt transfer queue. |
| PollingInterval | Indicates the periodic rate, in milliseconds, that the transfer is to be executed.This parameter is required when IsNewTransfer is TRUE. The value must be between 1 to 255, otherwise EFI_INVALID_PARAMETER is returned. The units are in milliseconds. |
| DataLength | Specifies the length, in bytes, of the data to be received from the USB device. This parameter is only required when IsNewTransfer is TRUE. |
| InterruptCallback | The Callback function. This function is called if the asynchronous interrupt transfer is completed. This parameter is required when IsNewTransfer is TRUE. |
| Context | Data passed to the InterruptCallback function. This is an optional parameter and may be NULL. |
| EFI_SUCCESS | The asynchronous USB transfer request transfer has been successfully executed. |
| EFI_DEVICE_ERROR | The asynchronous USB transfer request failed. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_ASYNC_ISOCHRONOUS_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 DeviceEndpoint, IN OUT VOID *Data, IN UINTN DataLength, IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack, IN VOID *Context) |
This function is used to manage a USB device with an isochronous transfer pipe. An Isochronous transfer is typically used to transfer streaming data.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceEndpoint | The destination USB device endpoint to which the device request is being sent. DeviceEndpoint must be between 0x01 and 0x0F or between 0x81 and 0x8F, otherwise EFI_INVALID_PARAMETER is returned. If the endpoint is not a BULK endpoint, EFI_INVALID_PARAMETER is returned. The MSB of this parameter indicates the endpoint direction. The number "1" stands for an IN endpoint, and "0" stands for an OUT endpoint. |
| Data | A pointer to the buffer of data that will be transmitted to USB device or received from USB device. |
| DataLength | The size, in bytes, of the data buffer specified by Data. This is an optional parameter and may be NULL. |
| IsochronousCallback | The IsochronousCallback() function.This function is called if the requested isochronous transfer is completed. |
| Context | Data passed to the IsochronousCallback() function. |
| EFI_SUCCESS | The asynchronous isochronous transfer has been successfully submitted to the system. |
| EFI_INVALID_PARAMETER | The parameter DeviceEndpoint is not valid. |
| EFI_OUT_OF_RESOURCES | The request could not be submitted due to a lack of resources. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_BULK_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 DeviceEndpoint, IN OUT VOID *Data, IN OUT UINTN *DataLength, IN UINTN Timeout, OUT UINT32 *Status) |
This function is used to manage a USB device with the bulk transfer pipe. Bulk Transfers are typically used to transfer large amounts of data to/from USB devices.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceEndpoint | The destination USB device endpoint to which the device request is being sent. DeviceEndpoint must be between 0x01 and 0x0F or between 0x81 and 0x8F, otherwise EFI_INVALID_PARAMETER is returned. If the endpoint is not a BULK endpoint, EFI_INVALID_PARAMETER is returned. The MSB of this parameter indicates the endpoint direction. The number "1" stands for an IN endpoint, and "0" stands for an OUT endpoint. |
| Data | A pointer to the buffer of data that will be transmitted to USB device or received from USB device. |
| DataLength | The size, in bytes, of the data buffer specified by Data. On input, the size, in bytes, of the data buffer specified by Data. On output, the number of bytes that were actually transferred. |
| Timeout | Indicating the transfer should be completed within this time frame. The units are in milliseconds. If Timeout is 0, then the caller must wait for the function to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned. |
| Status | This parameter indicates the USB transfer status. |
| EFI_SUCCESS | The bulk transfer has been successfully executed. |
| EFI_DEVICE_ERROR | The transfer failed. The transfer status is returned in Status. |
| EFI_INVALID_PARAMETE | One or more parameters are invalid. |
| EFI_OUT_OF_RESOURCES | The request could not be submitted due to a lack of resources. |
| EFI_TIMEOUT | The control transfer fails due to timeout. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_CONTROL_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN EFI_USB_DEVICE_REQUEST *Request, IN EFI_USB_DATA_DIRECTION Direction, IN UINT32 Timeout, IN OUT VOID *Data, IN UINTN DataLength, OUT UINT32 *Status) |
This function is used to manage a USB device with a control transfer pipe. A control transfer is typically used to perform device initialization and configuration.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| Request | A pointer to the USB device request that will be sent to the USB device. |
| Direction | Indicates the data direction. |
| Timeout | Indicating the transfer should be completed within this time frame. The units are in milliseconds. |
| Data | A pointer to the buffer of data that will be transmitted to USB device or received from USB device. |
| DataLength | The size, in bytes, of the data buffer specified by Data. |
| Status | A pointer to the result of the USB transfer. |
| EFI_SUCCESS | The control transfer has been successfully executed. |
| EFI_DEVICE_ERROR | The transfer failed. The transfer status is returned in Status. |
| EFI_INVALID_PARAMETE | One or more parameters are invalid. |
| EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
| EFI_TIMEOUT | The control transfer fails due to timeout. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_CONFIG_DESCRIPTOR)(IN EFI_USB_IO_PROTOCOL *This, OUT EFI_USB_CONFIG_DESCRIPTOR *ConfigurationDescriptor) |
Retrieves the USB Device Descriptor.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| ConfigurationDescriptor | A pointer to the caller allocated USB Active Configuration Descriptor. |
| EFI_SUCCESS | The active configuration descriptor was retrieved successfully. |
| EFI_INVALID_PARAMETER | ConfigurationDescriptor is NULL. |
| EFI_NOT_FOUND | An active configuration descriptor cannot be found. The device may not be configured. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_DEVICE_DESCRIPTOR)(IN EFI_USB_IO_PROTOCOL *This, OUT EFI_USB_DEVICE_DESCRIPTOR *DeviceDescriptor) |
Retrieves the USB Device Descriptor.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceDescriptor | A pointer to the caller allocated USB Device Descriptor. |
| EFI_SUCCESS | The device descriptor was retrieved successfully. |
| EFI_INVALID_PARAMETER | DeviceDescriptor is NULL. |
| EFI_NOT_FOUND | The device descriptor was not found. The device may not be configured. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_ENDPOINT_DESCRIPTOR)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 EndpointIndex, OUT EFI_USB_ENDPOINT_DESCRIPTOR *EndpointDescriptor) |
Retrieves an Endpoint Descriptor within a USB Controller.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| EndpointIndex | Indicates which endpoint descriptor to retrieve. |
| EndpointDescriptor | A pointer to the caller allocated USB Endpoint Descriptor of a USB controller. |
| EFI_SUCCESS | The endpoint descriptor was retrieved successfully. |
| EFI_INVALID_PARAMETER | One or more parameters are invalid. |
| EFI_NOT_FOUND | The endpoint descriptor cannot be found. The device may not be correctly configured. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_INTERFACE_DESCRIPTOR)(IN EFI_USB_IO_PROTOCOL *This, OUT EFI_USB_INTERFACE_DESCRIPTOR *InterfaceDescriptor) |
Retrieves the Interface Descriptor for a USB Device Controller. As stated earlier, an interface within a USB device is equivalently to a USB Controller within the current configuration.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| InterfaceDescriptor | A pointer to the caller allocated USB Interface Descriptor within the configuration setting. |
| EFI_SUCCESS | The interface descriptor retrieved successfully. |
| EFI_INVALID_PARAMETER | InterfaceDescriptor is NULL. |
| EFI_NOT_FOUND | The interface descriptor cannot be found. The device may not be correctly configured. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_STRING_DESCRIPTOR)(IN EFI_USB_IO_PROTOCOL *This, IN UINT16 LangID, IN UINT8 StringID, OUT CHAR16 **String) |
Retrieves a string stored in a USB Device.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| LangID | The Language ID for the string being retrieved. |
| StringID | The ID of the string being retrieved. |
| String | A pointer to a buffer allocated by this function with AllocatePool() to store the string.If this function returns EFI_SUCCESS, it stores the string the caller wants to get. The caller should release the string buffer with FreePool() after the string is not used any more. |
| EFI_SUCCESS | The string was retrieved successfully. |
| EFI_NOT_FOUND | The string specified by LangID and StringID was not found. |
| EFI_OUT_OF_RESOURCES | There are not enough resources to allocate the return buffer String. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_GET_SUPPORTED_LANGUAGE)(IN EFI_USB_IO_PROTOCOL *This, OUT UINT16 **LangIDTable, OUT UINT16 *TableSize) |
Retrieves all the language ID codes that the USB device supports.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| LangIDTable | Language ID for the string the caller wants to get. This is a 16-bit ID defined by Microsoft. This buffer pointer is allocated and maintained by the USB Bus Driver, the caller should not modify its contents. |
| TableSize | The size, in bytes, of the table LangIDTable. |
| EFI_SUCCESS | The support languages were retrieved successfully. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_ISOCHRONOUS_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 DeviceEndpoint, IN OUT VOID *Data, IN UINTN DataLength, OUT UINT32 *Status) |
This function is used to manage a USB device with an isochronous transfer pipe. An Isochronous transfer is typically used to transfer streaming data.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceEndpoint | The destination USB device endpoint to which the device request is being sent. DeviceEndpoint must be between 0x01 and 0x0F or between 0x81 and 0x8F, otherwise EFI_INVALID_PARAMETER is returned. If the endpoint is not a BULK endpoint, EFI_INVALID_PARAMETER is returned. The MSB of this parameter indicates the endpoint direction. The number "1" stands for an IN endpoint, and "0" stands for an OUT endpoint. |
| Data | A pointer to the buffer of data that will be transmitted to USB device or received from USB device. |
| DataLength | The size, in bytes, of the data buffer specified by Data. |
| Status | This parameter indicates the USB transfer status. |
| EFI_SUCCESS | The isochronous transfer has been successfully executed. |
| EFI_INVALID_PARAMETER | The parameter DeviceEndpoint is not valid. |
| EFI_DEVICE_ERROR | The transfer failed due to the reason other than timeout, The error status is returned in Status. |
| EFI_OUT_OF_RESOURCES | The request could not be submitted due to a lack of resources. |
| EFI_TIMEOUT | The transfer fails due to timeout. |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_PORT_RESET)(IN EFI_USB_IO_PROTOCOL *This) |
Resets and reconfigures the USB controller. This function will work for all USB devices except USB Hub Controllers.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| EFI_SUCCESS | The USB controller was reset. |
| EFI_INVALID_PARAMETER | If the controller specified by This is a USB hub. |
| EFI_DEVICE_ERROR | An error occurred during the reconfiguration process. |
| typedef struct _EFI_USB_IO_PROTOCOL EFI_USB_IO_PROTOCOL |
| typedef EFI_STATUS(EFIAPI * EFI_USB_IO_SYNC_INTERRUPT_TRANSFER)(IN EFI_USB_IO_PROTOCOL *This, IN UINT8 DeviceEndpoint, IN OUT VOID *Data, IN OUT UINTN *DataLength, IN UINTN Timeout, OUT UINT32 *Status) |
This function is used to manage a USB device with an interrupt transfer pipe.
| This | A pointer to the EFI_USB_IO_PROTOCOL instance. |
| DeviceEndpoint | The destination USB device endpoint to which the device request is being sent. DeviceEndpoint must be between 0x01 and 0x0F or between 0x81 and 0x8F, otherwise EFI_INVALID_PARAMETER is returned. If the endpoint is not a BULK endpoint, EFI_INVALID_PARAMETER is returned. The MSB of this parameter indicates the endpoint direction. The number "1" stands for an IN endpoint, and "0" stands for an OUT endpoint. |
| Data | A pointer to the buffer of data that will be transmitted to USB device or received from USB device. |
| DataLength | On input, then size, in bytes, of the buffer Data. On output, the amount of data actually transferred. |
| Timeout | The time out, in seconds, for this transfer. If Timeout is 0, then the caller must wait for the function to be completed until EFI_SUCCESS or EFI_DEVICE_ERROR is returned. If the transfer is not completed in this time frame, then EFI_TIMEOUT is returned. |
| Status | This parameter indicates the USB transfer status. |
| EFI_SUCCESS | The sync interrupt transfer has been successfully executed. |
| EFI_INVALID_PARAMETER | One or more parameters are invalid. |
| EFI_DEVICE_ERROR | The sync interrupt transfer request failed. |
| EFI_OUT_OF_RESOURCES | The request could not be submitted due to a lack of resources. |
| EFI_TIMEOUT | The transfer fails due to timeout. |
| EFI_GUID gEfiUsbIoProtocolGuid |
1.8.6 
