MdePkg[all]
1.08
|
Data Structures | |
struct | _EFI_SIMPLE_FILE_SYSTEM_PROTOCOL |
struct | EFI_FILE_IO_TOKEN |
struct | _EFI_FILE_PROTOCOL |
Macros | |
#define | EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID |
#define | SIMPLE_FILE_SYSTEM_PROTOCOL EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID |
#define | EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION 0x00010000 |
#define | EFI_FILE_IO_INTERFACE_REVISION EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION |
#define | EFI_FILE_MODE_READ 0x0000000000000001ULL |
#define | EFI_FILE_MODE_WRITE 0x0000000000000002ULL |
#define | EFI_FILE_MODE_CREATE 0x8000000000000000ULL |
#define | EFI_FILE_READ_ONLY 0x0000000000000001ULL |
#define | EFI_FILE_HIDDEN 0x0000000000000002ULL |
#define | EFI_FILE_SYSTEM 0x0000000000000004ULL |
#define | EFI_FILE_RESERVED 0x0000000000000008ULL |
#define | EFI_FILE_DIRECTORY 0x0000000000000010ULL |
#define | EFI_FILE_ARCHIVE 0x0000000000000020ULL |
#define | EFI_FILE_VALID_ATTR 0x0000000000000037ULL |
#define | EFI_FILE_PROTOCOL_REVISION 0x00010000 |
#define | EFI_FILE_PROTOCOL_REVISION2 0x00020000 |
#define | EFI_FILE_PROTOCOL_LATEST_REVISION EFI_FILE_PROTOCOL_REVISION2 |
#define | EFI_FILE_REVISION EFI_FILE_PROTOCOL_REVISION |
Functions | |
typedef | EFI_STATUS (EFIAPI *EFI_FILE_READ_EX)(IN EFI_FILE_PROTOCOL *This |
Variables | |
EFI_GUID | gEfiSimpleFileSystemProtocolGuid |
SimpleFileSystem protocol as defined in the UEFI 2.0 specification.
The SimpleFileSystem protocol is the programmatic access to the FAT (12,16,32) file system specified in UEFI 2.0. It can also be used to abstract a file system other than FAT.
UEFI 2.0 can boot from any valid EFI image contained in a SimpleFileSystem.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
#define EFI_FILE_ARCHIVE 0x0000000000000020ULL |
#define EFI_FILE_DIRECTORY 0x0000000000000010ULL |
#define EFI_FILE_HIDDEN 0x0000000000000002ULL |
#define EFI_FILE_IO_INTERFACE_REVISION EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION |
Revision defined in EFI1.1
#define EFI_FILE_MODE_CREATE 0x8000000000000000ULL |
#define EFI_FILE_MODE_READ 0x0000000000000001ULL |
#define EFI_FILE_MODE_WRITE 0x0000000000000002ULL |
#define EFI_FILE_PROTOCOL_LATEST_REVISION EFI_FILE_PROTOCOL_REVISION2 |
#define EFI_FILE_PROTOCOL_REVISION 0x00010000 |
#define EFI_FILE_PROTOCOL_REVISION2 0x00020000 |
#define EFI_FILE_READ_ONLY 0x0000000000000001ULL |
#define EFI_FILE_RESERVED 0x0000000000000008ULL |
#define EFI_FILE_REVISION EFI_FILE_PROTOCOL_REVISION |
#define EFI_FILE_SYSTEM 0x0000000000000004ULL |
#define EFI_FILE_VALID_ATTR 0x0000000000000037ULL |
#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID |
#define EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_REVISION 0x00010000 |
#define SIMPLE_FILE_SYSTEM_PROTOCOL EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID |
Protocol GUID name defined in EFI1.1.
typedef EFI_FILE_PROTOCOL EFI_FILE |
typedef EFI_STATUS(EFIAPI * EFI_FILE_CLOSE)(IN EFI_FILE_PROTOCOL *This) |
Closes a specified file handle.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to close. |
EFI_SUCCESS | The file was closed. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_DELETE)(IN EFI_FILE_PROTOCOL *This) |
Close and delete the file handle.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the handle to the file to delete. |
EFI_SUCCESS | The file was closed and deleted, and the handle was closed. |
EFI_WARN_DELETE_FAILURE | The handle was closed, but the file was not deleted. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_FLUSH)(IN EFI_FILE_PROTOCOL *This) |
Flushes all modified data associated with a file to a device.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to flush. |
EFI_SUCCESS | The data was flushed. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | The file or medium is write-protected. |
EFI_ACCESS_DENIED | The file was opened read-only. |
EFI_VOLUME_FULL | The volume is full. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_GET_INFO)(IN EFI_FILE_PROTOCOL *This, IN EFI_GUID *InformationType, IN OUT UINTN *BufferSize, OUT VOID *Buffer) |
Returns information about a file.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle the requested information is for. |
InformationType | The type identifier for the information being requested. |
BufferSize | On input, the size of Buffer. On output, the amount of data returned in Buffer. In both cases, the size is measured in bytes. |
Buffer | A pointer to the data buffer to return. The buffer's type is indicated by InformationType. |
EFI_SUCCESS | The information was returned. |
EFI_UNSUPPORTED | The InformationType is not known. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_BUFFER_TOO_SMALL | The BufferSize is too small to read the current directory entry. BufferSize has been updated with the size needed to complete the request. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_GET_POSITION)(IN EFI_FILE_PROTOCOL *This, OUT UINT64 *Position) |
Returns a file's current position.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to get the current position on. |
Position | The address to return the file's current position value. |
EFI_SUCCESS | The position was returned. |
EFI_UNSUPPORTED | The request is not valid on open directories. |
EFI_DEVICE_ERROR | An attempt was made to get the position from a deleted file. |
typedef struct _EFI_FILE_PROTOCOL* EFI_FILE_HANDLE |
Protocol name defined in EFI1.1.
typedef EFI_STATUS(EFIAPI * EFI_FILE_OPEN)(IN EFI_FILE_PROTOCOL *This, OUT EFI_FILE_PROTOCOL **NewHandle, IN CHAR16 *FileName, IN UINT64 OpenMode, IN UINT64 Attributes) |
Opens a new file relative to the source file's location.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to the source location. This would typically be an open handle to a directory. |
NewHandle | A pointer to the location to return the opened handle for the new file. |
FileName | The Null-terminated string of the name of the file to be opened. The file name may contain the following path modifiers: "\", ".", and "..". |
OpenMode | The mode to open the file. The only valid combinations that the file may be opened with are: Read, Read/Write, or Create/Read/Write. |
Attributes | Only valid for EFI_FILE_MODE_CREATE, in which case these are the attribute bits for the newly created file. |
EFI_SUCCESS | The file was opened. |
EFI_NOT_FOUND | The specified file could not be found on the device. |
EFI_NO_MEDIA | The device has no medium. |
EFI_MEDIA_CHANGED | The device has a different medium in it or the medium is no longer supported. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | An attempt was made to create a file, or open a file for write when the media is write-protected. |
EFI_ACCESS_DENIED | The service denied access to the file. |
EFI_OUT_OF_RESOURCES | Not enough resources were available to open the file. |
EFI_VOLUME_FULL | The volume is full. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_OPEN_EX)(IN EFI_FILE_PROTOCOL *This, OUT EFI_FILE_PROTOCOL **NewHandle, IN CHAR16 *FileName, IN UINT64 OpenMode, IN UINT64 Attributes, IN OUT EFI_FILE_IO_TOKEN *Token) |
Opens a new file relative to the source directory's location.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to the source location. |
NewHandle | A pointer to the location to return the opened handle for the new file. |
FileName | The Null-terminated string of the name of the file to be opened. The file name may contain the following path modifiers: "\", ".", and "..". |
OpenMode | The mode to open the file. The only valid combinations that the file may be opened with are: Read, Read/Write, or Create/Read/Write. |
Attributes | Only valid for EFI_FILE_MODE_CREATE, in which case these are the attribute bits for the newly created file. |
Token | A pointer to the token associated with the transaction. |
EFI_SUCCESS | If Event is NULL (blocking I/O): The data was read successfully. If Event is not NULL (asynchronous I/O): The request was successfully queued for processing. |
EFI_NOT_FOUND | The specified file could not be found on the device. |
EFI_NO_MEDIA | The device has no medium. |
EFI_MEDIA_CHANGED | The device has a different medium in it or the medium is no longer supported. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | An attempt was made to create a file, or open a file for write when the media is write-protected. |
EFI_ACCESS_DENIED | The service denied access to the file. |
EFI_OUT_OF_RESOURCES | Not enough resources were available to open the file. |
EFI_VOLUME_FULL | The volume is full. |
typedef struct _EFI_FILE_PROTOCOL EFI_FILE_PROTOCOL |
typedef EFI_STATUS(EFIAPI * EFI_FILE_READ)(IN EFI_FILE_PROTOCOL *This, IN OUT UINTN *BufferSize, OUT VOID *Buffer) |
Reads data from a file.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to read data from. |
BufferSize | On input, the size of the Buffer. On output, the amount of data returned in Buffer. In both cases, the size is measured in bytes. |
Buffer | The buffer into which the data is read. |
EFI_SUCCESS | Data was read. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_DEVICE_ERROR | An attempt was made to read from a deleted file. |
EFI_DEVICE_ERROR | On entry, the current file position is beyond the end of the file. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_BUFFER_TOO_SMALL | The BufferSize is too small to read the current directory entry. BufferSize has been updated with the size needed to complete the request. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_SET_INFO)(IN EFI_FILE_PROTOCOL *This, IN EFI_GUID *InformationType, IN UINTN BufferSize, IN VOID *Buffer) |
Sets information about a file.
File | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle the information is for. |
InformationType | The type identifier for the information being set. |
BufferSize | The size, in bytes, of Buffer. |
Buffer | A pointer to the data buffer to write. The buffer's type is indicated by InformationType. |
EFI_SUCCESS | The information was set. |
EFI_UNSUPPORTED | The InformationType is not known. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | InformationType is EFI_FILE_INFO_ID and the media is read-only. |
EFI_WRITE_PROTECTED | InformationType is EFI_FILE_PROTOCOL_SYSTEM_INFO_ID and the media is read only. |
EFI_WRITE_PROTECTED | InformationType is EFI_FILE_SYSTEM_VOLUME_LABEL_ID and the media is read-only. |
EFI_ACCESS_DENIED | An attempt is made to change the name of a file to a file that is already present. |
EFI_ACCESS_DENIED | An attempt is being made to change the EFI_FILE_DIRECTORY Attribute. |
EFI_ACCESS_DENIED | An attempt is being made to change the size of a directory. |
EFI_ACCESS_DENIED | InformationType is EFI_FILE_INFO_ID and the file was opened read-only and an attempt is being made to modify a field other than Attribute. |
EFI_VOLUME_FULL | The volume is full. |
EFI_BAD_BUFFER_SIZE | BufferSize is smaller than the size of the type indicated by InformationType. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_SET_POSITION)(IN EFI_FILE_PROTOCOL *This, IN UINT64 Position) |
Sets a file's current position.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to set the requested position on. |
Position | The byte position from the start of the file to set. |
EFI_SUCCESS | The position was set. |
EFI_UNSUPPORTED | The seek request for nonzero is not valid on open directories. |
EFI_DEVICE_ERROR | An attempt was made to set the position of a deleted file. |
typedef EFI_STATUS(EFIAPI * EFI_FILE_WRITE)(IN EFI_FILE_PROTOCOL *This, IN OUT UINTN *BufferSize, IN VOID *Buffer) |
Writes data to a file.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to write data to. |
BufferSize | On input, the size of the Buffer. On output, the amount of data actually written. In both cases, the size is measured in bytes. |
Buffer | The buffer of data to write. |
EFI_SUCCESS | Data was written. |
EFI_UNSUPPORTED | Writes to open directory files are not supported. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_DEVICE_ERROR | An attempt was made to write to a deleted file. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | The file or medium is write-protected. |
EFI_ACCESS_DENIED | The file was opened read only. |
EFI_VOLUME_FULL | The volume is full. |
typedef struct _EFI_SIMPLE_FILE_SYSTEM_PROTOCOL EFI_SIMPLE_FILE_SYSTEM_PROTOCOL |
typedef EFI_STATUS(EFIAPI * EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_OPEN_VOLUME)(IN EFI_SIMPLE_FILE_SYSTEM_PROTOCOL *This, OUT EFI_FILE_PROTOCOL **Root) |
Open the root directory on a volume.
This | A pointer to the volume to open the root directory. |
Root | A pointer to the location to return the opened file handle for the root directory. |
EFI_SUCCESS | The device was opened. |
EFI_UNSUPPORTED | This volume does not support the requested file system type. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_ACCESS_DENIED | The service denied access to the file. |
EFI_OUT_OF_RESOURCES | The volume was not opened due to lack of resources. |
EFI_MEDIA_CHANGED | The device has a different medium in it or the medium is no longer supported. Any existing file handles for this volume are no longer valid. To access the files on the new medium, the volume must be reopened with OpenVolume(). |
typedef IN OUT EFI_FILE_IO_TOKEN* Token |
typedef EFI_STATUS | ( | EFIAPI * | EFI_FILE_FLUSH_EX | ) |
Reads data from a file.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to read data from. |
Token | A pointer to the token associated with the transaction. |
EFI_SUCCESS | If Event is NULL (blocking I/O): The data was read successfully. If Event is not NULL (asynchronous I/O): The request was successfully queued for processing. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_DEVICE_ERROR | An attempt was made to read from a deleted file. |
EFI_DEVICE_ERROR | On entry, the current file position is beyond the end of the file. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_OUT_OF_RESOURCES | Unable to queue the request due to lack of resources. |
Writes data to a file.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to write data to. |
Token | A pointer to the token associated with the transaction. |
EFI_SUCCESS | If Event is NULL (blocking I/O): The data was read successfully. If Event is not NULL (asynchronous I/O): The request was successfully queued for processing. |
EFI_UNSUPPORTED | Writes to open directory files are not supported. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_DEVICE_ERROR | An attempt was made to write to a deleted file. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | The file or medium is write-protected. |
EFI_ACCESS_DENIED | The file was opened read only. |
EFI_VOLUME_FULL | The volume is full. |
EFI_OUT_OF_RESOURCES | Unable to queue the request due to lack of resources. |
Flushes all modified data associated with a file to a device.
This | A pointer to the EFI_FILE_PROTOCOL instance that is the file handle to flush. |
Token | A pointer to the token associated with the transaction. |
EFI_SUCCESS | If Event is NULL (blocking I/O): The data was read successfully. If Event is not NULL (asynchronous I/O): The request was successfully queued for processing. |
EFI_NO_MEDIA | The device has no medium. |
EFI_DEVICE_ERROR | The device reported an error. |
EFI_VOLUME_CORRUPTED | The file system structures are corrupted. |
EFI_WRITE_PROTECTED | The file or medium is write-protected. |
EFI_ACCESS_DENIED | The file was opened read-only. |
EFI_VOLUME_FULL | The volume is full. |
EFI_OUT_OF_RESOURCES | Unable to queue the request due to lack of resources. |
EFI_GUID gEfiSimpleFileSystemProtocolGuid |