MdePkg[all]
1.08
|
Data Structures | |
struct | EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS |
struct | EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_ACCESS |
struct | _EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL |
Variables | |
EFI_GUID | gEfiPciRootBridgeIoProtocolGuid |
PCI Root Bridge I/O protocol as defined in the UEFI 2.0 specification.
PCI Root Bridge I/O protocol is used by PCI Bus Driver to perform PCI Memory, PCI I/O, and PCI Configuration cycles on a PCI Root Bridge. It also provides services to perform defferent types of bus mastering DMA.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent
#define EFI_PCI_ADDRESS | ( | bus, | |
dev, | |||
func, | |||
reg | |||
) |
#define EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 |
#define EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO 0x0020 |
#define EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO 0x0040 |
#define EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER (~EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER) |
#define EFI_PCI_ATTRIBUTE_ISA_IO 0x0002 |
#define EFI_PCI_ATTRIBUTE_ISA_IO_16 0x10000 |
#define EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001 |
#define EFI_PCI_ATTRIBUTE_MEMORY_CACHED 0x0800 |
#define EFI_PCI_ATTRIBUTE_MEMORY_DISABLE 0x1000 |
#define EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 |
#define EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER (EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE | EFI_PCI_ATTRIBUTE_MEMORY_CACHED | EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE) |
#define EFI_PCI_ATTRIBUTE_VGA_IO 0x0010 |
#define EFI_PCI_ATTRIBUTE_VGA_IO_16 0x40000 |
#define EFI_PCI_ATTRIBUTE_VGA_MEMORY 0x0008 |
#define EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO 0x0004 |
#define EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 0x20000 |
#define EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_GUID |
typedef struct _EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_ALLOCATE_BUFFER)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN EFI_ALLOCATE_TYPE Type, IN EFI_MEMORY_TYPE MemoryType, IN UINTN Pages, IN OUT VOID **HostAddress, IN UINT64 Attributes) |
Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or EfiPciOperationBusMasterCommonBuffer64 mapping.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Type | This parameter is not used and must be ignored. |
MemoryType | The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData. |
Pages | The number of pages to allocate. |
HostAddress | A pointer to store the base system memory address of the allocated range. |
Attributes | The requested bit mask of attributes for the allocated range. |
EFI_SUCCESS | The requested memory pages were allocated. |
EFI_UNSUPPORTED | Attributes is unsupported. The only legal attribute bits are MEMORY_WRITE_COMBINE and MEMORY_CACHED. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
EFI_OUT_OF_RESOURCES | The memory pages could not be allocated. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_CONFIGURATION)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, OUT VOID **Resources) |
Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI resource descriptors.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Resources | A pointer to the resource descriptors that describe the current configuration of this PCI root bridge. |
EFI_SUCCESS | The current configuration of this PCI root bridge was returned in Resources. |
EFI_UNSUPPORTED | The current configuration of this PCI root bridge could not be retrieved. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_COPY_MEM)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, IN UINT64 DestAddress, IN UINT64 SrcAddress, IN UINTN Count) |
Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI root bridge memory space.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. |
Width | Signifies the width of the memory operations. |
DestAddress | The destination address of the memory operation. |
SrcAddress | The source address of the memory operation. |
Count | The number of memory operations to perform. |
EFI_SUCCESS | The data was copied from one memory region to another memory region. |
EFI_INVALID_PARAMETER | Width is invalid for this PCI root bridge. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_FLUSH)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This) |
Flushes all PCI posted write transactions from a PCI host bridge to system memory.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
EFI_SUCCESS | The PCI posted write transactions were flushed from the PCI host bridge to system memory. |
EFI_DEVICE_ERROR | The PCI posted write transactions were not flushed from the PCI host bridge due to a hardware error. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_FREE_BUFFER)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN UINTN Pages, IN VOID *HostAddress) |
Frees memory that was allocated with AllocateBuffer().
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Pages | The number of pages to free. |
HostAddress | The base system memory address of the allocated range. |
EFI_SUCCESS | The requested memory pages were freed. |
EFI_INVALID_PARAMETER | The memory range specified by HostAddress and Pages was not allocated with AllocateBuffer(). |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_GET_ATTRIBUTES)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, OUT UINT64 *Supports, OUT UINT64 *Attributes) |
Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the attributes that a PCI root bridge is currently using.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Supports | A pointer to the mask of attributes that this PCI root bridge supports setting with SetAttributes(). |
Attributes | A pointer to the mask of attributes that this PCI root bridge is currently using. |
EFI_SUCCESS | If Supports is not NULL, then the attributes that the PCI root bridge supports is returned in Supports. If Attributes is not NULL, then the attributes that the PCI root bridge is currently using is returned in Attributes. |
EFI_INVALID_PARAMETER | Both Supports and Attributes are NULL. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_IO_MEM)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, IN UINT64 Address, IN UINTN Count, IN OUT VOID *Buffer) |
Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Width | Signifies the width of the memory operations. |
Address | The base address of the memory operations. |
Count | The number of memory operations to perform. |
Buffer | For read operations, the destination buffer to store the results. For write operations, the source buffer to write data from. |
EFI_SUCCESS | The data was read from or written to the PCI root bridge. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_MAP)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, IN VOID *HostAddress, IN OUT UINTN *NumberOfBytes, OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, OUT VOID **Mapping) |
Provides the PCI controller-specific addresses required to access system memory from a DMA bus master.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Operation | Indicates if the bus master is going to read or write to system memory. |
HostAddress | The system memory address to map to the PCI controller. |
NumberOfBytes | On input the number of bytes to map. On output the number of bytes that were mapped. |
DeviceAddress | The resulting map address for the bus master PCI controller to use to access the hosts HostAddress. |
Mapping | A resulting value to pass to Unmap(). |
EFI_SUCCESS | The range was mapped for the returned NumberOfBytes. |
EFI_UNSUPPORTED | The HostAddress cannot be mapped as a common buffer. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_DEVICE_ERROR | The system hardware could not map the requested address. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_POLL_IO_MEM)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, IN UINT64 Address, IN UINT64 Mask, IN UINT64 Value, IN UINT64 Delay, OUT UINT64 *Result) |
Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is satisfied or after a defined duration.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Width | Signifies the width of the memory or I/O operations. |
Address | The base address of the memory or I/O operations. |
Mask | Mask used for the polling criteria. |
Value | The comparison value used for the polling exit criteria. |
Delay | The number of 100 ns units to poll. |
Result | Pointer to the last value read from the memory location. |
EFI_SUCCESS | The last data returned from the access matched the poll exit criteria. |
EFI_TIMEOUT | Delay expired before a match occurred. |
EFI_OUT_OF_RESOURCES | The request could not be completed due to a lack of resources. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_SET_ATTRIBUTES)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN UINT64 Attributes, IN OUT UINT64 *ResourceBase, IN OUT UINT64 *ResourceLength) |
Sets attributes for a resource range on a PCI root bridge.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Attributes | The mask of attributes to set. |
ResourceBase | A pointer to the base address of the resource range to be modified by the attributes specified by Attributes. |
ResourceLength | A pointer to the length of the resource range to be modified by the attributes specified by Attributes. |
EFI_SUCCESS | The set of attributes specified by Attributes for the resource range specified by ResourceBase and ResourceLength were set on the PCI root bridge, and the actual resource range is returned in ResuourceBase and ResourceLength. |
EFI_UNSUPPORTED | A bit is set in Attributes that is not supported by the PCI Root Bridge. |
EFI_OUT_OF_RESOURCES | There are not enough resources to set the attributes on the resource range specified by BaseAddress and Length. |
EFI_INVALID_PARAMETER | One or more parameters are invalid. |
typedef EFI_STATUS(EFIAPI * EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_UNMAP)(IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, IN VOID *Mapping) |
Completes the Map() operation and releases any corresponding resources.
This | A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. |
Mapping | The mapping value returned from Map(). |
EFI_SUCCESS | The range was unmapped. |
EFI_INVALID_PARAMETER | Mapping is not a value that was returned by Map(). |
EFI_DEVICE_ERROR | The data was not committed to the target system memory. |
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH
EFI_GUID gEfiPciRootBridgeIoProtocolGuid |